Grommets - Strand Laid Hand Splice
A grommet is a special type of sling which forms a continuous loop. Grommets either have a wire rope body
or a body made up of 6 strands which are laid helically around a strand core. A mechanical splice then forms an endless sling body. The minimum circumference is 96 times the body diameter.
6 x 19 or 6 x 37 classification IWRC-EIPS
*Larger sizes available upon request.
Grommets are used in applications where
the rigging might be too short for a standard eye & eye wire rope sling.
Grommets can be more desirable than eye
& eye wire rope slings when extra flexibility
is desired or when lifts are limited with low
Rated Capacities Basket Hitch based on D/d ratio of 5 where “d” = diameter of the finished grommet.
Rated Capacities based on pin diameter no smaller than 5 times the body diameter.
Rated Capacitties based on design factor of 5.
Horizontal Sling angles less than 30 degrees shall not be used.
Rated Capacity in tons.
Mobile Load Testing Services and Inspections
We offer inspections and mobile proof test services for product verification, break testing, and load testing to ensure compliance for all wire rope slings we sell and repair. Our mobile proof test services are available throughout the United States. In addition to our mobile load testing services we have stationary test beds to service Oklahoma, Texas, Kansas, Wyoming, North Dakota, New Mexico and all surrounding areas.