Enter Your Details Below

866-369-9507
MENU
866-369-9507
MENU
Picture of Jaw and Jaw Turnbuckles

Jaw and Jaw Turnbuckles

Meets the performance requirements of Federal Specifications FF-T791b,Type 1,Form 1 - Class 7,and ASTM F-1145,except for those provisions required of the contractor.
Be the first to review this product
*
Call for pricing
Request More Information

  • End fittings are Quenched and Tempered,bodies heat treated by normalizing.
  • Hot Dip galvanized steel.
  • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
  • Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8",and pins and cotters on 3/4" through 2-3/4" sizes.
  • Modified UNJ thread on end fittings for improved fatigue properties.
  • Body has UNC threads.
  • All products meet or exceed all the requirements of ASME B30.26 including identification,ductility,design factor,proof load and temperature requirements. All products meet other critical performance requirements including fatigue life,impact properties and material traceability,not addressed by ASME B30.26.
  • Fatigue Rated.



* Proof Load is 2.5 times the Working Load Limit.Ultimate Load is five times the Working Load Limit.
Mechanical Galvanized.
Related products
Picture of 7x19 Galvanized Wire Rope (Aircraft Cable)

7x19 Galvanized Wire Rope (Aircraft Cable)

“Aircraft cable” has become an accepted industry term for small diameter 7x7 and 7x19 construction wire rope. Tough construction, resists crushing of heavy loads, used where flexibility and good resistance to wear is required. It is not intended for aircraft use, but designed for industrial and marine applications.
Call for pricing
Picture of Malleable Wire Rope Clips (U Bolt)

Malleable Wire Rope Clips (U Bolt)

This design of wire rope clip is available to handle wire rope or strand sizes ranging from 1/16" - 1-1/8". Malleable wire rope clips are used in light duty & general purpose applications while drop forged wire rope clips are recommended for overhead lifting applications. Each malleable wire rope clip is zinc plated according to federal specification FF-C-450 D, TYPE 1, CLASS 2.
Call for pricing
Picture of Bolt Type Anchor Shackles (BTAS)

Bolt Type Anchor Shackles (BTAS)

Complete with bolt, nut and cotter pin.
Call for pricing
Picture of Synthetic Web Sling - Endless ( Type 5 )

Synthetic Web Sling - Endless ( Type 5 )

Endless web sling,sometimes referred to as a grommet.It is a continuous loop formed by joining the ends of the fabric together with a splice. Sling proof testing services available upon request.
Call for pricing

HORIZON PRODUCT INFORMATION REQUEST

Product:
Options:
Sku:
Full Name*:
Company:
Phone*:
Email*:
Comments:

Note: Safe. Secure. Spam Free.


  • oil gas industry
  • manufacturing industry
  • construction industry