Enter Your Details Below

866-369-9507
MENU
866-369-9507
MENU
Picture of Eye and Eye Turnbuckles

Eye and Eye Turnbuckles

Meets the performance requirements of Federal Specifications FF-T791b,Type 1,Form 1 - Class 4,and ASTM F-1145,except for those provisions required of the contractor.
Be the first to review this product
*
Call for pricing
Request More Information

  • End fittings are Quenched and Tempered,bodies heat treated by normalizing.
  • Hot Dip galvanized steel.
  • Turnbuckle eyes are forged elongated,by design,to maximize easy attachment in system and minimize stress in the eye.For turnbuckle sizes 1/4" through 2-1/2", a shackle one size smaller can be reeved through eye.
  • Modified UNJ thread on end fittings for improved fatigue properties.Body has UNC threads.
  • All products meet or exceed all requirements of ASME B30.26 including identification, ductility,design factor,proof load and temperature requirements. All products meet other critical performance requirements including fatigue life, impact properties and material traceability,not addressed by ASME B30.26.
  • TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
  • Fatigue Rated.



* Proof Load is 2.5 times the Working Load Limit.Ultimate Load is five times the Working Load Limit.
Mechanical Galvanized.
Related products
Picture of 7x19 Galvanized Wire Rope (Aircraft Cable)

7x19 Galvanized Wire Rope (Aircraft Cable)

“Aircraft cable” has become an accepted industry term for small diameter 7x7 and 7x19 construction wire rope. Tough construction, resists crushing of heavy loads, used where flexibility and good resistance to wear is required. It is not intended for aircraft use, but designed for industrial and marine applications.
Call for pricing
Picture of Drop Forged Wire Rope Clips ( U Bolt)

Drop Forged Wire Rope Clips ( U Bolt)

Entire clip is galvanized to resist corrosion and rust. Bolts are an integral part of the saddle and the nuts can be installed in such a way as to enable the operator to swing the wrench in a half arc for fast installation. All sized have forged steel saddles. All wire rope clips are individually bagged or tagged with proper application instructions and warning information. Product meets or exceeds all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, the wire rope clips meet other critical performance requirements including fatigue life, impact properties and material
Call for pricing
Picture of Bolt Type Anchor Shackles (BTAS)

Bolt Type Anchor Shackles (BTAS)

Complete with bolt, nut and cotter pin.
Call for pricing
Picture of Synthetic Web Sling - Endless ( Type 5 )

Synthetic Web Sling - Endless ( Type 5 )

Endless web sling,sometimes referred to as a grommet.It is a continuous loop formed by joining the ends of the fabric together with a splice. Sling proof testing services available upon request.
Call for pricing

HORIZON PRODUCT INFORMATION REQUEST

Product:
Options:
Sku:
Full Name*:
Company:
Phone*:
Email*:
Comments:

Note: Safe. Secure. Spam Free.


  • oil gas industry
  • manufacturing industry
  • construction industry