8-Part Braid - Double Leg Choker Wire Rope Slings
Multi-Part slings are flexible, snug up tightly around the load in choker hitches, and quickly regain shape after a lift. They also offer outstanding handling characteristics, particularly in the large rated capacities. When loaded, stress is equally distributed to all rope parts in the sling body due to the helical manner in which rope are laid together.
Braided slings are formed by continuously plaiting, or braiding several ropes together to form the sling body and both in a single fabrication operation. Ends of individual roes are usually hand-tucked or mechanically spliced into component ropes of the body.
Braided slings are often selected where loads must be rolled or maneuvered, since the design creates friction to grip loads and resist rotation.
# Made with 7 x 19 Galvanized component rope
* Rated Capacities BAsket Hitch based on D/d ratio of 25 times the component rope diameter.
** See Choker Hitch Rated Capacity Adjustment.
Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter
Rated Capacities based on design factor of 5.
All capacities in tons of 2,000 lbs. All eye and fitting dimension in inches.
Mobile Load Testing Services and Inspections
We offer inspections and mobile proof test services for product verification, break testing, and load testing to ensure compliance for all wire rope slings we sell and repair. Our mobile proof test services are available throughout the United States. In addition to our mobile load testing services we have stationary test beds to service Oklahoma, Texas, Kansas, Wyoming, North Dakota, New Mexico and all surrounding areas.