Horizontal Clamp - FHX/FHSX

Complete with bolt, nut and cotter pin.

This style of universal beam can be utilized as a lifting beam where headroom is limited or a spreader beam where extra stability is required. As a lifting beam, the upper lift point can be easily adjusted to lift an off center load. Can be configured as an optional three or four point lifting system. Can be supplied with optional chain top rigging. Supplied with one upper shackle for adjustable bail positions and two lower shackles for adjustable spreads. Engineered and manufactured to ASME B30.20 & BTH-1 Design Category B Service Class 2. All lifting beams are proof tested to 125% capacity and certificates supplied upon request.

Double leg wire rope slings commonly have a mechanical splice / flemish eyes on the end of the body, and are constructed of 2 wire rope assemblies that are attached to an oblong master link. The lifting ends of the wire rope legs can be fitted with a variety of hooks, eyes, or rings to allow attachment to any object. These are designed for general lifting when the attachment can be made directly to the load. Wire rope slings are constructed of strong high quality steel that is resistant to corrosion, heat, sunlight, and most chemicals. Thimbles greatly improve sling longevity by protecting the wire rope at connection points. Our wire rope slings are custom built to meet your specific needs for any application.