Proof Coil Hot Dipped Galvanized Chain- Grade 30

Chain Warnings

• Never exceed the Working Load Limit (WLL) of the chain.
• Only grade 80 alloy chain or higher should be used for overhead lifting.
• Remember to always match components.
• Avoid shock loads.
• Assemblies will carry the WWL of the weakest part.
• Never move under a raised load.
• Frequently inspect chain. Never use chain that has a deformed link, rust, crack or any indication that would cause doubt about its strength.
• Always destroy defective chain by cutting it into short pieces to prevent someone from using it.
• Refer to OSHA standard 1910.184 and ASME standard B 30.9 for current design factors for chain slings.