Guy Line Blocks

6 x 19 and 6 x 37 classification ropes provide an excellent balance between fatigue and wear resistance. They give excellent service with sheaves and drums of moderate size. 6 x 37 classification because of the emphasis on fatigue resistance the problem of choice is greatly reduced. Although there are exceptions, the constructions in the 6 x 37 classification are primarily designed to be the most efficient for each rope diameter. As the rope size increases, for instance, a large number of wires can be used to achieve required fatigue resistance and still those wires will be large enough to offer adequate resistance to abrasion. It should be noted that the greater the number of wires make the 6 x 37 classification more susceptible to crushing. However, this can frequently be overcome by an independent wire rope core (IWRC) and by the use of well designed sheaves and grooved drums. 6 x 19 classification has outer wires larger than 6 x 37 classification, and therefore its resistance to abrasion is increased, but its fatigue resistance is decreased. 6 x 19 classification is a good rope to withstand abrasion or crushing on the drum.

Entire clip is galvanized to resist corrosion and rust. Bolts are an integral part of the saddle and the nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation. All sized have forged steel saddles. All fist grips are individually bagged or tagged with proper application instructions and warning information. Product meets or exceeds all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, the fist grips meet other critical performance requirements including fatigue life, impact properties and material traceability.

Heavy Duty Wire Rope Thimbles meet the requirements of Federal Specification FF-276b, Type III.

Complete with bolt, nut and cotter pin.